Buttweld 45° Elbow Manufacturers in India
-
45° elbow has a center line curvature equal to 1-1/2 times the nominal pipe size (NPS) for 3/4 inch and larger sizes.
-
Buttweld 45° Elbow Range of Size Diameters – from 21, 3 to 711 mm and Wall Thickness – from 2 to 40 mm.
-
Standards of Buttweld 45° Elbow ANSI B16.9 ASTM A403 ASME SA403, Standard Specification for Wrought Authenticate Stainless Steel Piping Fittings API 590-605 ASME B16.9, Factory Made Wrought Butt welding Fittings ASME B16.25 Butt welding Ends, ASME B16.28 Wrought Steel Butt welding Short Radius Elbows and Returns MSS SP-43, Wrought and Fabricated Butt-Welding Fittings for Low Pressure Corrosion Resistant Applications.
Buttewld 45° Elbow Manufacturers – Top Quality Buttweld 45° Elbow Dealers in India!
- Asiamet is a manufacturer, stockiest & supplier of premium quality range of ASME B16.9 Elbow, stainless steel flanges & other stainless steel pipe fittings that are manufactured under the expert guidance of our diligent workforce. We are highly experienced company in ASME B16.9 elbow & other pipe fittings. Our ASME B16.9 elbow & other fitting products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. Designed in compliance with international quality standards these ASME B16.9 elbow are corrosion resistance, sturdy and durable. We also supply ASME B16.9 elbow & other pipe fittings flanges in customized size.
- Buttweld 45° elbow is a particular standard band per created designed pipe connector or pipe joint. It is intended to be flanges, screwed or welded. We produce all the buttweld elbows in fluctuated size, measurement and grade. These elbows are utilized to alter the course of certain funneling or piping framework. We create and send out amazing piping fittings. You can purchase ANSI/ASME B16.9 titanium 45° elbow.
- These buttweld elbow takes after the requirements of the accompanying enterprises for example, mining, oil refineries, steel and aluminum fabricating, aviation businesses and development organizations.
- Buttweld 45° degree elbow roll out a 45° improvement of course in the keep running of the pipe. The best producer of alloy steel, carbon steel, duplex steel, inconel buttweld 45° elbow giving a wide selection of colors, grades and details.
Product | Buttweld 45° Elbow |
Size (mm) | Diameters – from 21, 3 to 711 mm |
Dimension | ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, Type B, JIS B2312, JIS B2313 |
Wall Thickness | 2 to 40 mm |
Schedule | 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc. |
Price Terms | Ex-Works, FOB, CIF, CFR, CNF |
Latest Price | Call +919619672006 |
sales@asiametsteel.com |

-
Do you want to know how much does a buttweld 45° elbow cost? Do you want to know where you can get the best price and quality buttweld elbow pin India?
-
We are ready to provide you our quality products, fast delivery service and custom buttweld 45° elbow sizes. Send us your detailed inquiry to us, our professional staff will get back to you with our best solution and costs.
-
The experts here in this company are aimed to provide the best quality of elbow as per the requirement and demand of customers.
What is a Buttweld 45° Elbow?
The function of a 45° elbow is the same as a 90° elbow, but the measurement of dimensions is different to that of the 90° elbow. The radius of a 45° elbow is the same as the radius of the 90° (1.1/2D). However, the center to face dimension is not equivalent to the radius as in 90° elbows. This is due to the smaller degree of bend.
Grade of Buttweld 45° Elbow
- Montel Grade: Monel 400, Monel K500, Monel R-405
- Nickel Grade: Nickel 200, Nickel 201
- Inconel Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718
- Nicolay Grade: Nicolay 800, Inconel 800H, 800HT
- Hast alloy Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
- Titanium Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
- Stainless Steel Grade: ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 333, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
- Alloy Steel Grade: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
- Carbon Steel Grade: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Application of Buttweld 45° Elbow
- Pipeline
- Water Pipe Line
- Chemical Refinery
- Oil and Gas Industry
- Nuclear Power Plants
- Paper & Pulp Companies
- Boiler & Heat Exchangers
- High Pressure Applications
- High Temperature Application
- Food Processing and Dairy Industries
Features of Buttweld 45° Elbow
- Reduce pressure losses
- Offer permanent leak proof
- Deliver a framework that uses at least space
- Adds strength and power to the piping structure
What is a Buttweld Fitting?
A buttweld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter or branching or ending. Buttweld pipe fittings comprises of long radius elbow, concentric reducer, eccentric reducers and tees etc. Butt weld stainless steel and carbon steel fittings are an important part of industrial piping system to change direction, branch off or to mechanically join equipment to the system. Buttweld fittings are sold in nominal pipe sizes with specified pipe schedule. Buttweld fitting’s dimensions and tolerances are defined as per ASME standard B16.9.butt welded pipe fittings such as carbon steel and stainless steel offer many advantages compared to threaded and socket weld fittings. The latter are only available up to 4-inch nominal size whereas butt weld fittings are available in sizes from ½” to 48”.
Various Type of Buttweld Fitting?
- Elbow Buttweld Fitting – Elbows are used to change the direction of flow between two pipes. Elbows are generally available with an angle of 22.5o, 45o and 90o.
- Reducer Buttweld Fittings – Reducer is a pipe fitting component which reduces the flow size from larger to smaller by reducing size of pipe. Usually there are two types of reducers are available.
- Tee Buttweld Fitting – Tee type fitting is a component of plumbing system which is in T-shape. It is having one inlet and two outlets, outlets are arranged at 90 degree to the main line connection
- Cross Buttweld Fitting – Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.
- Unions Buttweld Fitting – Union is a type of fitting, which functions as similar to coupling. But coupling cannot be removed after fixing but in this case we can remove the union whenever we needed.
- Adaptors Buttweld Fitting – If the pipes are not having special ends or plain ends then adaptors make them threaded either male or female whichever is needed.
- Olet Buttweld Fitting – Olets are used when there is standard sizes of fittings are not suitable for our requirement.
- Plug Buttweld Fitting – Plug is a component of plumbing component which is generally used to close pipe opening during inspections and repairs. Plug are generally contains male threads.
- Cap Buttweld Fitting – Cap is a type of pipe fitting which function is same as plug but the only difference is plug contain male threads and cap contain female threads which is screws on the male thread of pipe.
- Valves in Pipe Fittings – Valves are components of plumbing system which are used to stop or regulate flow of fluid in its path. Different types of valves are available depending up on their applications.
Steel Pipe Fittings Standard
American Steel Pipe Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-234 | Medium and high temperature used carbon and alloy steel pipe fittings |
ANSI ASME SA-420 | Low temperature forged carbon and alloy steel pipe fittings |
ANSI ASME SA-403 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ANSI ASME B16.5 | Pipe flange and flange fittings |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
ASME B16.3 | Malleable cast iron threaded pipe |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
JIS B2316 | Steel socket-welding pipe fittings |
Russian Steel Pipe Fittings Standard | |
Gost17375 | Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
Gost17376 | Carbon and low-alloy steel butt-welding fittings.Tees. Design |
Gost30753 | Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
Gost17378 | Carbon and low-alloy steel butt-weldings. Reducers. Design |
Gost17379 | Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
Gost17380 | Carbon and low-alloy steel butt-weldings fittings. General specifications |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Steel Pipe Fittings Material
Material standard | Material |
ASTM A182 ASME SA182 | F304 F304L F304/304L F304H F309H F310 F310HF316 F316L F316/316L F316 HF316Ti F317L F321 F321H F347 F347H F904L F44 F51 F53 F55 F60 |
ASTM A403 ASME SA403 | WP304 WP304L WP304/304L WP316 WP316L WP316/316L WP321 |
DIN EN 10222-5 | EN1.4307 EN1.4949 EN1.4301/1.4307 EN1.4401 EN1.4435 EN1.4404 EN1.4401/1.4404 EN1.4541 EN1.4571 |
EN10095 | EN 1.4841 EN 1.4878 |
EN10269 | EN 1.4919 |
DIN EN 10088-2 | EN1.4438 EN1.4501 EN1.4529 EN1.4539 EN1.4547 EN 1.4301 EN 1.4306 EN 1.4307 |
DIN EN 10222-5 | EN1.4410 EN1.4550 EN1.4462 |
NF E 29-204 | BF Z 3 CN 19-09 BF Z 7 CN 19-09 BF Z CN 18-09/19-09 BF Z 23 CND 17-11-02 BF Z7 CND 17-11-02 BF Z3/2Z7 |
JIS G3214 | SUSF304 SUSF304L SUSF316 SUSF316L |
ASTM A105 | A105 |
ASTM A182 ASME SA182 | F1 F5 F9 F11 F12 F22 F91 |
ASTM A234 ASME SA234 | WPB WP11CL1 WP11CL2 WP11CL3 WP22CL1 WP22CL3 |
ASTM A694 ASME SA694 | F42 F46 F53 F56 F60 F65 F70 |
ASTM A36 | A36 |
ASTM A350 | A350 LF1 A350 LF2 A350 LF3 |
EN 10273 | P235GH(1.0345) P250GH(C22.8 1.0460) P295GH(1.0481) P335GH(1.1.0473) |
EN 10222-2 | P245GH(1.0352) P280GH(1.0426) P305GH(1.0436) |
DIN17175 | ST35.8(1.0305) |
EN10025-2 | S235JR(RST37-2)(1.0038) S275JR(1.0044) S355JR(1.0045) 1.5415(16Mo3) |
BS 4360 | 43A |
EN10025-3 | S420N(1.8902) |
Packaging of Buttweld 45° Elbow
- Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
- We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as shrink wrapped, carton boxes, wooden pallets, wooden boxes, woden crates
FAQ’s regarding Buttweld Pipe Fittings
Are you a trading company or a manufacturer?
We are a manufacturer of Buttweld 45° Elbow in India.
What are you main products?
We manufacture all kinds of elbow, tees, caps, flanges and steel pipes etc. with different materials.
Do you provide free samples?
Yes, we would provide sample on your request.
Why should I choose Asiamet as our source for buttweld pipe fittings?
We offer best quality product at most competitive price in the industry. You are promised to obtain the best quality, price and service.
How to ensure the quality?
Mill Test Certificate is provided for all material. If needed, we can also allow third party inspection or buyer’s inspection
How long is your delivery time for Buttweld 45° Elbow ?
Generally it is 5-10 days if the good are in stock. Or it is 15-20 days if the goods are not in stock, it is according to quality