Special Washer Manufacturers in India

  • Some fastener assemblies require flat washers with nonstandard dimensions. For more stressful loads a thicker or wider washer may be needed. In some cases a washer may be used as a spacer and be thicker than available plate stock.

  • Special Washers Available Size M3 – M48

  • Standard of Special Washer are TM 182 Stainless Steel 304/304L Special Washer Fastener, ASTM 194 SS 316/316L/316H Special Washer Fastener, ASTM A193 347/347H/ 317L Special Washer Fastener, Carbon Steel ASTM 193 B6/B7 Special Washer Fastener, Alloy Steel ASTM 320 L7/L7A/L72 Special Washer Fastener, Brass C270000 Special Washer Fastener, Duplex Steel S31803/S32205 Special Washer Fastener, Hastelloy B2/B3/C22 Special Washer Fastener, Incoloy 800/800H/800HT Special Washer Fastener, Inconel 600/601 Special Washer Fastener, Monel 400/K500 Special Washer Fastener, Nickel Alloy 200/201 Special Washer Fastener

Special Washers Manufacturers – Top Quality Special Washers Suppliers in India!

  • Asiamet is a leading manufacturer, suppliers in India. Washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device and to reduce vibration (rubber washer). Washers often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary quite widely.
  • Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre load due to Brine ling after the torque is applied.
  • Rubber or fiber gaskets used in taps (or faucets, or valves) to seal against water leaks are sometimes referred to colloquially as washers but while they may look similar, washers and gaskets are usually designed for different functions and made differently.
  • Special washers are defined by their non-circular inside and/or outside shapes. Asiamet manufactures a wide variety of common special washers including C washers, D washers, tab washers, conical washers, wave spring washers and notched washers
Product Special Washer
Size M3 – M48 and also available in all customized sizes
Die forging Closed die forging, open die forging and hand forging.
Threads Metric, BSW, BSF, UNC, UNF
Surface Finish Blackening, Cadmium zinc plated, Galvanized, Hot dip Galvanized, Nickel
Plated, Buffing, etc.
Price Terms Ex-Works, FOB, CIF, CFR, CNF
Latest Price Call +919619672006
Email sales@asiametsteel.com

Special Washer Suppliers, Dealers
  • Do you want to know how much does special washer fasteners cost? Do you want to know where you can get the best price and quality steel washer in India?

  • We are ready to provide you our quality products, fast delivery service and custom cut washer sizes. Send us your detailed inquiry to us, our professional staff will get back to you with our best solution and costs.

  • The experts here in this company are aimed to provide the best quality of washer as per the requirement and demand of customers.

What is a Special Washer?

Special washers have the same purpose as traditional standard washers however they are defined by their irregular shape being either non-circular on the inside or outside. Standard washers have two main purposes to distribute the pressure of the nut evenly over the surface, so that the surface isn’t damaged, and. To ensure that the nut is pressed against a smooth surface reducing the chance that it’ll gradually loosen because it’s in contact with an uneven surface.

Grade of Special Washer

  • Stainless Steel – Grade: ASTM 182 , ASTM 193, ASTM 194, B8 (304), B8C (SS347), B8M (SS316), B8T (SS321), A2, A4, 304 / 304L / 304H, 310, 310S, 316 / 316L / 316H / 316 Ti, 317 / 317L, 321 / 321H, A193 B8T 347 / 347 H, 431, 410
  • Carbon Steel – Grade: ASTM 193, ASTM 194, B6, B7/ B7M, B16, 2, 2HM, 2H, Gr6, B7, B7M
  • Alloy Steel – Grade: ASTM 320 L7, L7A, L7B, L7C, L70, L71, L72, L73
  • Brass – Grade: C270000
  • Naval Brass – Grade: C46200, C46400
  • Copper – Grade: 110
  • Duplex & Super Duplex – Grade: S31803, S32205
  • Aluminum – Grade: C61300, C61400, C63000, C64200
  • Hastelloy – Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
  • Incoloy – Grade: Incoloy 800, Inconel 800H, 800HT
  • Inconel – Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718
  • Monel – Grade: Monel 400, Monel K500, Monel R-405
  • High Tensile Bolt – Grade: 9.8, 12.9, 10.9, 19.9.3
  • CUPRO-Nickel – Grade: 710, 715
  • Nickel Alloy – Grade: UNS 2200 (Nickel 200) / UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600) / UNS 6601 (Inconel 601), UNS 6625 (Inconel 625),UNS 10276 (Hastelloy C 276), UNS 8020 (Alloy 20 / 20 CB 3)

Difference in Special Washer

Special flat washer were developed by the society of automotive engineers to fulfill the requirements of automotive industries. They have smaller outer diameter and inner gauges or thickness than their counterpart bolt sizes of USS flat washer.

Special washer fastener fulfill the needs of engineering industrial applications like repair, maintenance and manufacturing.

We have a vast range of Special washer fastener which is manufactured using quality material and many clients appreciate our product because of its high tensile strength, durability and corrosion resistance features.

Application of Special Washer

  • Paper and Ports
  • Chemical and Sugar
  • Oil & Gas and Defense
  • Breweries and Railway
  • Oil Mills Petrochemical
  • Shipbuilding and Offshore
  • Construction and Fertilizers
  • Power Plant and Steel Plant
  • Mining Refineries and Nuclear Power
  • Cement Engineering Co. and Government Org.

Features of Special Washer

  • Fine Finish
  • High Durability
  • High Grade Raw Material

Test Certificates

  • Manufacturer Test Certificate as per EN 10204 / 3.1B
  • Raw Materials Certificate, 100% Radiography Test Report
  • Third Party Inspection Report

Quality Assurance

Asiamet all fittings and flanges are subject to strict inspection at each stage of the production process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products

Marking & Packing

Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All forged fittings are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also make custom marking on our products.